当前：首页 > 产品中心 > OB-TLOMEGA高温粘合剂-美国omega

OB-TLOMEGA高温粘合剂-美国omega

品牌/型号：美国omega（OB-TL）库号：H10109405

￥电联

保障：含运含税正品保障质保天

在线联系

美国omega

型号:OB-TL

OMEGA高温粘合剂

OMEGABOND® Thinning Liquid, 8 fluid oz used to dampen porous substrates before application

Thermally Conductive

Thermal Shock Resistant

Electrically Insulating

Resists Oils, Solvents, Most Acids

Adheres to Practically All Clean Non-Porous Surfaces

Porous Surfaces May Require Dampening**

OMEGABOND® 300 for Assembling, Sealing, Insulating

OMEGABOND® 400 for Coating, Embedding, Insulating

OMEGABOND® 500 for Coating, Dipping, Castin

产品描述

Air Set Cements set or cure through loss of moisture by evaporation. Atmospheric conditions therefore affect the drying rate. Air Set Cements are used mainly in thin film applications (applied in thicknesses less than 1/4")*.

SELECTION CRITERIA FOR CEMENTS
1. Type of Application – Potting, sealing, encapsulating, assembling, bonding. Is a thick or thin film of cement required? This dictates whether or not an air set or a chemical set cement should be used.
2. Thermal Considerations – What is the maximum temperature that the cement must withstand? What degree of thermal conductivity is needed? What degree of thermal expansion is allowed? These parameters are then matched to the appropriate cement.
3. Substrate – What materials will the cement be in contact with?
4. Application Considerations – Pot life, set time, method of dispensing, batch size, cure procedure.
5. Miscellaneous Considerations – Porosity, moisture absorption, electrical resistance, volume stability, clearances/tolerances.